![]() Wash the reservoir thoroughly, both inside and out with your water hose. After removing the coolant reservoir, shake it upside down to remove any remaining coolant that is still left after siphoning. You will need to carefully remove these one by one, making sure to keep track of them as they're removed since you will need them to reattach the coolant reservoir when you are finished. Step 5 - Remove Coolant ReservoirĪ series of bolts and/or screws will typically attach your coolant reservoir to the chassis of your vehicle. Once the tube is clamped off, remove it where it connects to the coolant reservoir. Often, there will be a ring clamp present that can be adjusted with pliers. You will need to disconnect this in order to continue. Looking at the radiator and coolant reservoir, you will see a tube connecting the two components, known as the overflow tube. Relieve any pressure in the radiator system by releasing the cap on either the radiator or the coolant reservoir itself. Since the radiator, and especially the coolant reservoir, will be under pressure when the engine is in use or has recently been turned off, be sure to complete this step when you are sure that the engine has cooled completely. ![]() Once the leak is identified, you will want to mark it clearly with a marker so that you do not lose track of it in later steps. ![]() Step 2 - Find LeakĬarefully examine the reservoir entirely. Using your siphon hose and bucket, the first thing you will need to do is siphon all coolant out of the reservoir itself.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |